Friday, May 15, 2009

Gripped by the Mini Book Frenzy - Again

In the photo above you see the new and improved third generation of Ritter Sport Mini books. The Siam paper worked well (I talked about my intent to try it here) and I am going to make several of these - you'll see them again. I actually finished the chocolate book yesterday, and today I was bitten by the mini book bug (again), and I am going to talk about the teeny tiny books in the front.
Instead of throwing them away I folded the scraps from cutting the paper for the ritter sport mini into signatures and bound them to a book block with the dimensions: 1.2cm x 1cm x 0.6cm, about 1/2 " x 2/5" x 1/5"
This was the first book block.
The first book block in the "finishing press" - glueing the spine.
still in the press with glued on head bands and a marker ribbon. I had to cut away a big chunk of the band to which the head bands are attached, but they still look huge on this tiny spine :-)
Here I am "trying on" the the raw cover. I like to make the covers too large (also on usual sized books) and only cut them to size after checking the fit of the text block.
I thought the covers had too much space to the spine, but was deceived by the small size.
First cover improved imworsened. Then I cut the covers to length,...
parsed a tiny scrap of leather for the spine. Which was a hell of y job, since I lack the knowledge, experience and skill to do so (and I was using a kitchen knife). Then I covered the cover, glued in the book - first one done.

With the headbands the book was a tack too high for its cover. - It must be possible to do better...
Second book block done - looks better!
Thinned another piece of leather for the book. this time a bigger one, because I wanted it all in leather. Results: Fingers hurting, holes in the leather, but - a piece in the middle of it would be big enough to cover my teeny tiny mini book. But just even so, it could get a bit tight in the end. And so I punched with a hole punch
the frayed holes to nice round eylets. Added some more, too. Glued the leather to the blue Lokta paper I was also using for endsheets on the book block.
And then, I had the weirdest idea of all - hand sewn headbands. - It is a leather volume, right? So nice headbands are a must:
Sorry for the blurred picture, the spot was too small for my automatic focus to catch it... Anyway, this is the first headband done. In the instructions it says: "Be careful not to cut through your thread, when cutting the core to size." I though: Who would be so stupid to cut the thread? And the answer followed immediately: Me:
So, back to work. Here's the first headband done:
And here's the second:
And this time it turned out well enough, so that I have made the photo above click enlargable (I mean: Click to enlarge!).
In the meantime I covered the cover and: Voilá the second micro book done:
Unfortunately I notice now that the books don't open well - the spaces at between spine and cover are way too small. I should have know from experience that one doesn't scale everything down when working small.
But I am resisting the urge to try a third one.
This was kind of a mad project. (See some more picture on Flickr.)
Have to get back to serious work.

Thanks for reading!

Wednesday, May 13, 2009

No books today

Press

Several weeks ago I bought this press that you can see in the picture above. I was a little scared to start to work on it. I had read a lot of different and contradicting hints on how to prepare it for use. And I understood only half of it, because there were so many product names in it that are not known here.
However, yesterday I dared to start to work on it. First, I took the upper plate off the press. There was rust also between the lower and upper plate and I have no idea how I should clean it without removing this first.
presse 04
I started working on it with a sandpaper made for use on stone and metal. In the picture above I had obviously already started.
The paint only came off reluctantly and underneath more rust was hidden.
presse 05
This is how it looked like after half an hour work. (At the upper right you see my tool.) I had scratched in the paint, but had not gotten rid of any rust. Also further attampts with pot cleaner: a wire sponge with soap didn't yield totally satisfactory results:
presse 06

So I bought a set of wire brushes that can be attached to the electric drill machine. It took me a while to understand, how to use these new tools. In the beginning I used to few strength from my arms, and to much speed of the machine. I understood quickly that I need to push the brush onto the plate harder, but it took me half an hour or so to understand that it was rotating to quickly. This is how the plate looked like after half an hour working with the wire brush (visible next to the plate on the right):
presse 07
And yet another half hours....
presse 08

What's encouraging about working with the power tool is that all work seems to have at least some effect. With the sandpaper it didn't feel like I was going anywhere. Probably I could get the plate even smoother and remove the last bit of the old primer and rust.
But not today: My arms are (not unpleasantly) weak from pressing the brush against the iron plate and my hands just can't hold the drill anymore (I have some difficulty typing on my computer, actually). I'll have to continue tomorrow.

Since I already worked yesterday on the press, and today again - no books to show off today.

Thanks for reading!

Tuesday, May 12, 2009

Ritter Sport Mini Books - continued

It has been while now since I cut and sanded down cardboard/wooden chocolate pieces. I wrote an entry here about it. The initial plan was to integrate my own chocolates recipes in the booklets. But I did not seem to be able to set the text in a pleasing way. That lead to me discarding the idea altogether. But I still had all these 'chocolates' and thus decided to make a new (third) batch of the blank Ritter Sport Mini Books that I made last year.

Over the time some problems with these first and second batch became apparent:
If you take a close look (click on the image for an enlarged image) you can see that the thread tears out of the chocolate foil. This is because a) the thread only loops around the thread on a earlier signature without locking - I can do this better by now, and b) the reinforcement I used for the foil (filmoplast) was insufficient.
There are more problems. I had the books on display and all but one of them are ripped. People tend to squeeze and pinch the package in trying to determine whether there is still chocolate in the covers and the foil does not stand this strain. Again I figured, I need to strengthen the foil in some way.

And yet another problem was that the covers opened every now and then at the seams. I had used double sided tape to close them and one could easily push it back together, but still I found this very dissatisfactory. So this time I wanted to do better.
I made this much better models of the chocolate so that it should feel much more like chocolate than with the initial books. I glued the foil to a piece of paper before further proceeding with the binding. And I improved the binding itself. The result can be seen on top, right next to one of the second generation - very ugly. I thought it would be good to have the pages not the size of the chocolate but of the covers. Now I see that this was a bad decision. Also I made the signatures thicker, so that the bulk at the binding should be less. O.k., the bulk was less, but the finished product looks so much less than a mini book! And finally, the paper on the back of the foil makes it a lot sturdier - but you can no longer feel the fake-chocolate inside. I could just as well not have shaped them at all, but simply put a piece of wood inside.

So I'll take this apart again. I think I'll go for the small pages, and sewing station like in the first generation (the pink book). I'll glue paper to the foil, but I'll try a very thin Siam paper (5g per square meter) instead of the office paper (80g per square meter) that I used for the first.
I hope this will work better.
I'll let you know when there are new developments...

Thanks for reading!

Friday, May 8, 2009

Still only experiments

Finally I am back in my studio. As I said before, I feel a bit threatened by the craft fair I'm going to do in August. So I turned to the more crafty and less artistic side of things. Today I shopped for more cloth and will start to make some photo albums in near future.
But mainly I have had too much paper work to do - forms to fill out, contracts to terminate and to conclude... And the bad thing was that, as an answer to a growing pressure with deadlines for boring stuff, I canceled my free studio time. Which made me feel bad and perform even worse. But today I granted myself about an hour free time and I can feel the wheel turning again. Sure I will soon be on top of things again. Don't know whether this will end up as a project. At the moment I think it will. But I don't want to press it yet. It's important for me to stay patient with myself and continue the work with as few pressure as I can muster.

This little book object is about 3 cm high, 2cm wide. The pages cannot be moved at all. It is fixed like you see it. Neither can the pages be turned, nor could you change the angle at the spine. Also the one page that seems to be loose on the top picture is absolutely firm. You can't turn it without breaking it. The photo below shows the picture that I cut to pieces and made into the booklet:

Tuesday, May 5, 2009

Linocut with traditional linoleum

Mhm, bis jetzt hat sich noch niemand beschwert, dass ich ganz auf die Englische Sprache umgeschwungen bin. Ich fände es schade, wenn ich dadurch Leser verlieren würde. Eigentlich denke ich die meiste Zeit über Buchbinden in einem Kauderwelsch von Englisch und Deutsch nach, in dem ich am liebsten auch schreiben würde - aber das würde dann wahrscheinlich gar keiner mehr verstehen. Mal schauen, was ich auf Dauer so mache, heute aber mal wieder Englisch. Wenn euch Dinge näher interessieren, die ihr aber nicht (richtig) versteht, gerne nochmal nachfragen!

Yesterday I cut and stamped these new labels. And I took the time to show you the process.

This is how traditional linoleum looks like. According to my knowledge it is available under the name artist's lino in art supply stores. Its advantage compared to the soft lino that I was reviewing before is that is is firm and slightly brittle. This makes is possible to work out finer details. (If you need to go even more detailed you have to switch to harder materials, for example wood.)

The first thing to do is to sand the surface a bit to rub off some of the really hard finish on which it is very easy to slip with the carving knife. In the following picture you see at the left the (not yet completely) sanded lino.
When the lino is evenly sanded and cleaned, I painted them with thinned white water color:
Let it completely dry. - This shouldn't take long and afterwards it looks like this:
The advantage of the whitened surface is that it is easier to see the pencil marks:
You can now directly sketch on the lino with a soft pencil. Don't use sharpened pencils, because their pressure could already effect your prints. If something is not to your liking, you can try to rub it of with a usual rubber or simply wash the pencil marks off with a damp cloth - then you may want to apply white paint again.

There are also techniques to transfer images that you happen to have already onto the lino. You could for example trace an image printed on a sheet of paper with a soft pencil, and then rub it then onto the whitened lino. Then you get a mirror image of course!

Once you have your image on the lino, you start cutting away everything that you want 'white' in your print. (White means in this case the area where you don't want to print.)
A general warning: Remember to cut away from your body and fingers all the time!
You start by tracing all areas with a contour knife. In this case I simply used an exacto knife for this task. Generally you want a sharp knife with a blade not too flexible. Hold it as a slight angle away from the area that will remain on the lino, so that the edges of an area don't break off while printing:
Very fine details like very thin areas between two areas may already be removed that way. Then you take the V-shaped cutting tool and take away more lino. Again I trace the areas first and then take away more of the small areas. I can't mention this often enough: Always push the knife in a direction away from your body and fingers! The tools are very sharp. You will definitely slip at one time and you don't want to risk cutting away fingers or stabbing yourself. Instead of turning the knife (possibly towards your body or fingers) rather turn the lino when cutting around corners.
You don't need to cut very deep, essentially you only need to scratch the surface. Depth is needed to make the coloring of the plate easier. But already a slight dent in the surface will show in the print. So be careful where you rest your knife and how you store your linoleum.
The deeper you cut the more strength you will need, and the more strength you apply the more likely your knife will slip and ruin your work.
Here I am finished with the V-shaped knife and take the U-shaped tool in my hand. With the U-shaped tool it's easier to cut shallow and take away larger areas. I started taking away the interior. I generally like to start with the areas where I have to concentrate more (i.e. slipping is really bad) and pass on to those where I have to concentrate less.
Now I cut around the motif, inside the area where I already took away some lino. When bend the lino will easily break, and then you can use ordinary scissors to cut through the jute on the back to cut out the printing block.
Before you start printing, wash away the white paint!
The printing itself is the same as I have already described it when printing the smiley oracle. In this case you'll probably won't need soap for the paint (another advantage of sanding the lino). Another advantage of this traditional linoleum compared to the soft lino is that you can print with oil based colors (if you think this is an advantage, there are pros and cons regarding the choice of paint).

Afterwards you may want to take care of your tools. I am using oil stones to sharpen my cutting tools. They look like this:
In my set are 4 different stones, with increasing roughness from right to left (note: that's bollocks, they are all the same roughness). You start sharpening your knife on the roughest and proceed to the finest stone. (edit: if you have different roughnesses.) I use mineral oil on these stone, others work also with water. Rub a bit of it on your stone, then we start with the V-shaped tool:
Since it was already sharpened, you just have to have a close look at it to figure out the right angle in which to rub it on the stone. Rub both arms of the V back and forth in the correct angle - maybe ten times. You should have so much oil on your stone that you have a thin film of it on top that you push around with your blade. If you click on the picture you can see it. You do this on all four stone - and your tool is sharp again. Oil the blade lightly, wipe off any excess and store you tool.
Now we take care of the U-shaped knife:
Again you should be able to see the correct angle because it was already sharpened. This time you don't push it back and forth, but sideways, turning the knife around. Also go from the roughest to the smoothest stone, wipe off excess oil and store your tool.

In either case you don't need any strength here. You should rub the blades lightly, just so that you get a faint sound. Don't press too hard. If you feel your knife is rather getting dull than sharp, you are using the wrong angle. Just start over again and don't be afraid to try again. It needs some exercise before your wrist knows how to hold and to turn the knives.

Now have fun trying it yourself, don't hesitate to ask further questions. On the left bar you can see the tag 'techniques: linoleum', click it to read related posts.

Thanks for reading!

Saturday, May 2, 2009

Headbands

headband
Already some weeks ago (must be two months already) I bought the book "Headbands. How to work them" by Jane Greenfield and Jenny Hille. It's still too early to write a review of the book. I have not yet read much more than the first instruction for this headband with the beads on the edge, above. This was the very first headband I stitched and I must say I am rather pleased with the outcome. - It was much easier than I had anticipated, so it must be a good instruction. But of course the stitching has a lot of flaws. If you click on the image you'll get to my Flickr page and there I've added some tags, hinting at the most obvious mistakes.
The second try was already a slight improvement:
headband

Unfortunately the book block itself is rather crappy. My paper cutter continues to work extremely bad. I think I'll have to turn back to cutting the pages by hand: The cut is not perpendicular to the table, the knife, a replacement I only recently ordered, reached me dented.
And the worst thing about the book that has nothing to do with bad equipment: the edge coloring (swirly blue) is flaking off.

What do you usually do with books that turn out that bad? Take them apart? Keep them to yourself? I'd like to hear your opinions. I usually don't take them apart. This particular one will probably stay unfinished, tossed in some corner of my studio.
I made another book yesterday, another trial with a new technique, which is a complete color fail - I won't show it here. Take it apart? Maybe I will do that.

I'll close with showing you some more photos. These are from the mirror twin of the buttonhole I made recently. Now with the fancy paper outside:
Buttonhole - Inverted
Buttonhole - Inverted
Buttonhole - Inverted

Thanks for reading!